Long tension rods used on 6.5”x14″ Rogers snare drums and various tom drums. 2-1/2” long. Tension rods include ABS washers for smooth tuning.
Standard tension rods used on 5”x14″ Rogers snare drums and various tom drums. 1-5/8″ long. Tension rods include ABS washers for smooth tuning.
This optional retro-kit allows you to easily convert your Rogers RP100 chain drive pedal to a strap drive in minutes. Perfect for those who prefer that smooth vintage feel.
Based on the original Rogers design, these new claw replacements are great for repairing or restoring your Rogers bass drum.
This package includes Four Grey rubber tips to keep the ends of the Dyna-Sonic snare rail frame from rubbing against the snare gates.
Rogers “Beavertail Lugs” (for toms) were manufactured in Dayton Ohio until around 1972. These lugs were die-cast for durability and replaced the original drawn-brass B&B lug. The new Rogers vintage replacement Large tom Lugs are, in size and appearance a faithful reproduction of the original 1970’s lugs – however, they feature a completely re-worked spring-less design, using nylon inserts to hold the lug nuts in place. Lug body is 2 -5/16″ long Mounting hole spacing is 2 – 1/4″
Lug Body: 2-5/16″
Mounting Hole spacing: 2-1/4″
Springless Design
Includes Standard Mounting Screws and Gasket
Rogers “Beavertail Lugs” (for toms) were manufactured in Dayton Ohio until around 1972. These lugs were die-cast for durability and replaced the original drawn-brass B&B lug. The new Rogers vintage replacement small tom Lugs are, in size and appearance a faithful reproduction of the original 1970’s lugs – however, they feature a completely re-worked spring-less design, using nylon inserts to hold the lug nuts in place. Lug Body is 2 – 13/16″ long, while the Mounting hole spacing is 1 – 3/4″
Lug Body: 2-13/16″
Mounting Hole spacing: 1-3/4″
Springless Design
Includes Standard Mounting Screws and Gasket
This Classic toe stop was designed to fit on the Dyno-Matic pedal, as well as the RDH7 Hi Hat stand. Package includes toe stop and mounting screw.
Save time and aggravation with this revolutionary clutch system, just pull on the metal sleeve and the auto clutch releases. Slip off the felts mount your hi hat cymbal then pushes in at the bottom of the metal sleeve and you’re locked in place. All metal design uses a spring and ball bearings to hold sleeve in place.
Without any tools, you can instantly change the Beater playing surface from the standard felt side (muted tone), to the hard plastic side (crisp attack). Simply push down the spring loaded beater head and rotate it to the desired playing surface, and it snaps into place, ready to play.
Standard 1/4″ dia. beater shaft
Original Rogers design dual-surface beater
Total length: 7.5″
Rogers “Center Lugs” and “Beavertail Lugs” (for toms) were manufactured in Dayton Ohio until around 1972. These lugs were die-cast for durability and replaced the original drawn-brass B&B lug. The new Rogers vintage replacement Center Lugs are, in size and appearance a faithful reproduction of the original 1970’s lugs – however, they feature a completely re-worked spring-less design, using nylon inserts to hold the lug nuts in place.
Lug body: 2-1/4″ long end to end
Two sided spring-less design
Mounting hole spacing: 1-15/16″
Includes standard mounting screws and gasket
Rogers specially designed butt-end (backing plate) mirrors the angular, cut-away design found on their famous clock face strainer. The cut-away is engineered to hold the snare cord at the proper angle for precise alignment of the snares on both sides of the drum.
Rogers new matching butt-end is faithfully designed after the original in every way, but uses drum key adjustments for ease of use.
Die-cast design
Butt-end width aprox. 2-3/4″
Mounting hole spacing: 1-1/4″
Includes standard mounting screws
Rogers’ 1962 catalog touted it as “the most practical and most efficient strainer ever designed.” The special tempered roller mechanism, combined with the precision slide construction assures perfect action with a minimum of effort. The spring–loaded cartridge bearing eliminates the constant readjusting of snare by holding the tension screw in fixed position, whether snares are on, or off. Rogers new replacement strainer is faithful to the original legendary “clock face” design, using the best casting and chroming processes.
Clockface body: 4-1/2″ bottom to top of handle
Drum key adjustment
Mounting hole spacing: 1-1/8″
Includes standard mounting screws
This lug was used on Rogers drums between 1959 and 1964. The original iconic design was made of drawn brass with chrome plating. Known as the Bread & Butter lug,“B&B” or the “Tab Lug”, which refers to two threaded tabs that mounted the lug to the drum. Although a celebrated visual feature of the Rogers drums, these original lugs were prone to breaking over time, due to extended stress on the tabs- even with normal use.
The new Rogers B&B vintage replacement lug is, in size and appearance, a faithful reproduction of the original 1960 B&B lug – however, it features a completely re-worked die-cast construction that will not crack under tuning tension, or from any playing wear ‘n tear. A spring-less design uses nylon inserts to hold lug inserts in place.
Lug body: 2-1/4″ long end to end
Two sided spring-less design
Mounting hole spacing: 1-5/8″
Includes standard mounting screws and gasket
The Dyna-Sonic, batter side snare drum hoop is made of 1.6mm thick steel and contoured to the original Rogers triple-flange hoop design.
1.6mm thick, chrome-plated steel hoop
Original Rogers triple-flanged design – 14″, 10-hole format
The Dyna-Sonic snare, or bottom side snare drum hoop is made of 1.6mm thick steel and contoured to the original Rogers, triple-flange hoop design. This 14-inch, 10-hole hoop features protective snare gates based on the 1960’s era design.
1.6mm thick, chrome-plated steel hoop
Original Rogers triple-flanged design – 14″, 10-hole format
1960’s snare gate design
A set of Dyna-Sonic snare rail guards, or “gates” that attach to the outside of the bottom hoop of the drum. Package offers both strainer-side and butt-side gates with 4 mounting screws included (2 per gate). Based on the 1960s era Dyna-Sonic design.
Rogers original styled drum key. Die-cast original design with Rogers logo.
Made of die-cast steel
Original Rogers design